Charles Crocker took charge of the Central Pacific
Railroad operation with fearless optimism. He was merchant, not a railroad man,
so he learned railroad construction by doing it. Getting laborers proved to be difficult.
Most of the men who were hired worked for a grubstake for gold mining, then walked
off the job as soon as they got paid. Crocker then considered hiring Chinese
laborers, although his partners and foremen were skeptical. The Chinese men
were small—about four feet, 10 inches tall and weighing only about 120 pounds—and
it was believed they were not strong enough to do the work.
At that time there were about sixty thousand Chinese in
California. Most were young single men who had come to America for economic opportunity.
Many had emigrated in response to pamphlets put out by Chinese merchants
residing in San Francisco. The merchant companies paid the men's passage and
were repaid with a percentage of each man's earnings. The company honored its
contract to send the immigrants home free of charge if they became ill. In case
of death, they sent the person's bones home for burial.
 |
| Ravine Bridge near Colfax photo by Alfred A. Hart, ctsy Stanford Special Collections |
By the end of 1866, Crocker had eight thousand Orientals
and about two thousand Caucasians in his employ. The Central Pacific paid $30
per month to the Chinese, which was considered a good wage even though the men
had to buy their own food. The Chinese proved to be outstanding workers. They
excelled at teamwork, took few breaks, and became skilled at blasting. Caucasians
monopolized the skilled work such as trestling, masonry, and laying rails; and
they held the supervisory positions. The Chinese did the grading, made cuts and
fills, felled trees, and did the arduous and dangerous work of blasting.
 |
| Cape Horn overlooking the American River by Alfred A. Hart, ctsy Stanford Special Collections |
Beginning in the early summer of 1865, the Chinese
workers began construction on one of the most feared stretches of the route.
Nicknamed “Cape Horn,” it ran three miles along the precipitous gorge on the
North Fork of the American River. The slope was at an angle of seventy-five
degrees, and the tracks were to be laid along the mountainside between twelve
and twenty-two hundred feet above the river. There was not even a mountain goat
path for the workers to stand on while they blasted rock cuts on the sheer
cliffs. Many engineers did not think it could be done.
Workers were lowered over the rim in chairs to place
the black powder, and then fix and light the fuses. They then yelled do the men
above to pull them up to relative safety. The Chinese workers informed their foreman
that they had learned a better way from their ancestors who had built the
fortresses in the Yangtze gorges. They wove waist-high baskets with 4 eyelets
at the top, similar to the ones that their progenitors had used. Ropes ran from
the eyelets to a central cable.
 |
| Locomotive on finished Cape Horn track by Alfred A. Hart, ctsy Stanford Special Collections |
The Chinese workmen, hanging in their baskets, were
much safer than they had been while perched in those precarious chairs. Due to
the skill and dedication, the roadbed and track around Cape Horn were completed
in the spring of 1866, much sooner than had been anticipated. But hundreds of barrels
of black powder were ignited daily, and there were accidents. The Central
Pacific did not record Chinese casualties, so the number of deaths is not known.
From this dangerous operation came the phrase, “not a Chinaman's chance.”
 |
| Donner Pass terrain, typical of the Sierra Nevada Mountains |
Clearing the roadbed was almost as bad as blasting on
Cape Horn. Huge trees and other obstructions had to be removed from a twenty-five-foot
path on each side of the road bed. One gang of three hundred men spent ten full
workdays clearing a single mile of right-of-way. After the trees were hauled to
the sawmills, the stumps had to be blasted from the soil. Ten barrels of
blasting powder were often required to remove a single stump.
At Donner Summit, it took more than a year to cut the 1,659-foot
tunnel—more than a quarter mile—through solid granite and then bring the track
down the steep escarpment of the east slope in a meandering route past Donner
Lake. From there, getting the line from Truckee to present-day Reno would be
relatively easy since the line essentially followed the Truckee River and
continued into the Nevada desert with its comparatively flat topography.
The east portal of
Tunnel 6 and wagon road from Tunnel 7, photo by Alfred A. Hart, courtesy
Department of Special Collections/Stanford University Libraries
However, Tunnel 6 proved be extremely difficult. It was
one of 15 tunnels the Central Pacific used to conquer the Sierra and was by far
the most challenging. It was all done by hand. The Chinese worked in teams of
three, with one man holding the drill, while the other two workers swung
hammers. Once a sufficiently sized hole was augered out, a man would fill it
with blasting powder, light a fuse and hope for the best.
Tunnel 6 through
Donner Summit, photo by Alfred A. Hart, courtesy Department of Special
Collections/Stanford University Libraries
 |
| Snow on Donner Summit May 31, 2019 |
Progress was so
slow that the executives decided to try using nitroglycerin, which was more
powerful and less expensive than blasting powder. They found it to be safe if a
fresh amount was manufactured each day. Two thousand blasts were made in the
summit tunnel within less than two months, and not a single accident occurred.
Summer
snow drifts on Donner Summit during railroad construction, photo
by Alfred A. Hart, courtesy Department of Special Collections/Stanford
University Libraries
The severe
winter of 1865-66 and 1866-67 called for superhuman courage to keep things
going. There were forty-four separate storms during the winter of 1866-67. The
snowpack was eighteen feet deep at the summit, and the only work possible was
in the tunnels. There were accidents of all kinds, mainly from blasting powder.
Sometimes the heavy explosions started avalanches, and entire camps of workmen
were buried alive. In order to travel to and from the granite tunnels, the
Chinese laborers dug snow tunnels from fifty to five hundred feet long. Windows
and air shafts were bored through the snow walls, and the men lived in these labyrinths
all winter.
 |
| Railroad tracks next to Truckee River, May 31, 2019 |
There was only
light snow over the summit in Truckee Canyon, and Crocker was anxious to keep
his men working throughout the winter. From there they could grade up the eastern
face of the Sierra and also westward toward Nevada. There was only one major
problem. How would they transport the necessary rolling stock and equipment
over the summit? Crocker conceived and directed the tremendous undertaking of sledding
three locomotive, forty cars, and enough material for forty miles of track on
torturous mountain trails up over the summit and down into Truckee Canyon. This
extraordinary feat was accomplished by Chinese workers and ox teams.
A
locomotive over the Truckee River, photo by Alfred A. Hart, courtesy
Department of Special Collections/Stanford University Libraries
The first
locomotive from Truckee crossed the California and Nevada state line on
December 13, 1867. By the end of the year, only one difficult section near the
summit remained to be built. The tough work in solid rock above Donner Lake was
completed on June 15, 1868, which ended the difficult work in the Sierra
Nevada Mountains.
Emigrant Gap Tunnel and Snow Shed, photo by Alfred A. Hart, courtesy
Department of Special Collections/Stanford University Libraries
Because of the problems the builders encountered while
building the railroad, they knew the problem of heavy snows must be solved
before trains could be operated year-round. They built forty miles of sheds,
forming nearly a solid covering over the tracks. One railroader remarked, “I've
railroaded all over the world, but this is the first time I've ever railroaded
in a barn.” Gradually, as powerful rotary snow plows and improved snow fighting
methods were developed, the snow-shed mileage was reduced. In 1955, less than
six miles remained.
 |
| Snow Sheds still visible on railroad tracks today |
Although my novel, Escape from Gold Mountain, does not
take place during the building of the Transcontinental Railroad, it is set on
the eastern side of the Sierra Nevada Mountains and does have a Chinese
heroine. Inspired by true events that took place in 1884-85, I hope you will
enjoy reading this story about a woman from an American immigrant group that is
often overlooked. Her situation was typical of many of the Chinese women to
came to the United States in the nineteenth century.
Escapefrom Gold Mountain is currently on pre-order at a
special sale price that will end the day after the book is released. PLEASE CLICK HERE for the book
description and purchase link.
Sources:
Museum Memories, Volume 1 (Salt Lake City, Utah: International Daughters of
Utah Pioneers, 2009), Pgs. 404-407.http://tahoequarterly.com/summer-2019/surmounting-the-sierra
https://www.wbur.org/onpoint/2019/05/07/chinese-transcontinental-railroad-ghosts-of-gold-mountain-gordon-chang
